CP7748TL-2 1/2" Composite Impact Wrench
Model - CP7748TL-2
Handle type - Pistol
Square drive - 1/2"
Working Torque Range (fwd) - 90-96 Nm 66-71
Maximum Torque (reverse) - 1250 Nm 922 ft.lbs
Free speed - 8200 rpm
Blows per minute - 850
Net weight - 2.4 kg 5.3 lb
Power/weight ratio - 520.8 Nm/kg 174 ft.lb/lb
Length - 250 mm 9.8"
Side to center - 38 mm 1,50"
Average air consumption - 2.5 l/s 5 1/2 cfm
Actual air consumption - 10 l/s 22 cfm
Air inlet thread size - 0.25 "
Min. hose size - 10 mm 3/8"
Noise level - 86 db(A)
Sound Power - 97 db(A)
Vibration ? (ISO-28927-2) - 4.8 m/s²
Vibration K (ISO-28927-2) - 1.5 m/s²
Socket retainer - Friction ring
Clutch type - Twin Hammer
Box dimensions - 264*192*75 10.4*7.6*3
Benefits and Features
Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse
One Hand Operation: 2 power setting positions
Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
Low sound level
Suited for all light vehicle tire changing applications
1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet
The CP7748TL series is intended to be used as a snugging tool prior to final tightening with a calibrated torque wrench to reach the car manufacturers specified torque rating for wheel assembly.
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.
Download CP Industrial Tools Catalogue